Common PC Building Mistakes Almost Everyone Make

 


Common PC Building Mistakes Almost Everyone Make

Whether you are a beginner or a master in the world of PC building, you should read this article so that you do not make these mistakes. These are some of the common things people forget about because of excitement.

Motherboard

You should build everything you can on the motherboard before putting it into a case. A lot of cases look like they have plenty of rooms, but it gets harder to put things over time. You should build as much as you can on the table. You can assemble these things on the motherboard.

  • CPU
  • RAM
  • SSDs

Depending upon the case you have, you can install the CPU fans too. Remember that you could get to all crews on the top and bottom.

RAM Slots

Mainstream motherboards are all going to be dual channels. It gives you dual channel support from the CPU to store data into memory. You should not install RAM next to each other in these motherboards. It will work fine, but you will not get proper performance. You have occupied just one channel with two RAMs.

You are not getting tons of CPU performance because of a single channel. You can check the user manual to know about the dual channel. Make sure that you are putting them in the right order. Every manual page has a dedicated page telling you about steps based on the number of RAMs.

Force on processors

AMD and Intel are both designed to gently drop into the socket. There is no force necessary on the user’s side. The retention arm will hold the CPU for you. Pushing down on the CPU can bend them, and pins are very difficult to repair.

CPU Fans

A lot of coolers come with a plastic protector to keep the area smooth. Most people forget to remove this plastic film. Always remember to remove it; otherwise, you can overheat the system. The orientation of the cooler should always be in mind if you are using a tower cooler. Remember the size of your case while ordering the coolers for your computer.

Power Supply Units

Most people buy cheap PSUs. It is a very bad idea. It may even cost you more in the future. You should always go for 100 to 200 watt overhead over your total system power consumption.

If you are thinking of overclocking, you should always choose a good power supply unit. If you have a very limited budget, then downgrade your other components and get a decent power supply.

Thermal paste

Spreading your thermal paste may help you by reducing the temperature. You can decrease at least 3 to 5 degrees celsius from doing so. A heat sink will not be able to cover the whole IHS with thermal paste. You can do it easily by using a credit card.

Do not use a lot of thermal paste. The extra thermal paste on the motherboard can result in shorting it out. Some thermal compounds are non-conductive and non-capacitive. They will not harm your PC or Desktop.

Any other thermal paste containing metal can assist in heat transfer. Thermal paste is difficult to clean up. A grain of rice or a pea-sized amount is all you need.

Forget about the I/O Shield

The easiest way to avoid that is to simply install it right after opening the cabinet or case. People most likely get carried away and will only realize it after you have assembled your PC.

Overtightening the screws

This is important for your CPU cooler. If you have overtightened it, all thermal paste will spread to the sides, which is going to cause higher temps. You just need to tighten your CPU cooler up to a point you feel any pressure.

Installing Fans Wrong Way

Basically, you need a push-pull configuration. If you do it wrong, the hot air inside your PC will not be able to leave the cabinet or case. It will result in higher system temperature. You will need one or two fans to suck in the air and one exhaust fan at the back pushing the hot air out.

Graphics Card

Most people do not install the graphic cards on the right slot. You can not install your graphics card into any slot. For better performance, please insert your graphics card into the first or second PCIex16 slot. You can also use the PSIex8 slot, but do not go any lower than that. You will get a very choppy image and worse performance due to the lower bandwidth.

Power Supply Units Cables

Every cable has differently shaped pins. It is not easy to insert them anywhere on your PC. There are some places where you need to keep few things in mind. Do not plug in your 8 pin EPS cable to your GPU.

Make sure to double-check all of your connections before turning on your PC.

Some Other Common Mistakes

  • Skimping on airflow on CPU or Case vents.
  • Forget about static electricity.
  • Not balancing the build.
  • Cable management
  • Connecting your monitor cable into the motherboard while having a dedicated graphics card.
  • Check CPU generation support and required firmware version.
  • Pushing down on the processors.

Conclusion

These were the common mistakes people make while building a PC or Desktop. Avoiding these mistakes will save you from disaster. You can save a lot of money in the long run.

Source: https://softwarecolumn.com 

Comments

Post a Comment

Popular posts from this blog

How to Fix Advanced Touchpad Functionality Not Working?

Image
  With laptops becoming more and more advanced over time, the features of the touchpad have also increased dramatically. A touchpad is not merely a point-and-click device anymore; rather, it can be customized as per your requirements, depending on the tasks you perform. How to Fix My Windows Trackpad? At first, ensure that you have not disabled your trackpad features by using the Fn key. To turn on the touchpad, just click on your Function Key. The computer will show you whether you have turned on or off the touchpad in the middle of the screen. If the trackpad is on and the advanced features are still not operational, then check the hardware settings of your device. Troubleshooting Touchpad in Windows 10 Go to the Settings menu on your computer. In the settings menu, click on the Devices tab. Navigate to the Touchpad option and click on it to access its settings. Click on the Sensitivity settings, which include Most Sensitive, High, Medium, and Low Sensitivity. Modify Advanced Setting
Read more

PlayStation VR 2: Release Date, Design, And More About PSVR 2

Image
  A follow-up PlayStation VR headset is currently in development. Sony has announced that they are working on a follow-up to their PSVR headset for PlayStation 5. The PlayStation VR 2 is official, and it is coming out very, very soon. PSVR 2 has a lot of massive improvements. The original PSVR was introduced in 2016. It has pretty significant drawbacks such as resolution and tracking. We still do not know about the significant updates. PSVR 1 The current PSVR headset has lights surrounded all over it. PSVR controllers also have a big ball of light on them. The camera sees those lights and then tracks your movements. It has some issues, like you need to be in a dark room; otherwise, the PlayStation camera will not see the lights. The camera on the PSVR is also cant track fast movements. It has a resolution of 960x1080p per eye. It supports a 100-degree field of view. It is higher than the field view of quest 2. It has a refresh rate of up to 120 Hz. PSVR 2 The PSVR 2 headset will have t
Read more

How to Find the WordPress Theme of a Website

Image
  As a website visitor, sometimes one may get impressed by the theme of the website. These websites provide the most attractive outlook that can earn accolades every time. So, when the visitors think about designing their websites, they try to gain insights about the good theme according to their vision. The visitors will also try to know the names of the theme so that they can apply the same on their websites. These visitors may feel the jerk by trying out everywhere to add such good themes to their website. But, there are some hacks available using which one can get the idea of the WordPress themes that any website is using. In this article, we will extract the best alternatives to find a WordPress theme a site is using. WordPress Theme Detector WordPress Theme Detector is the best and easiest solution to understand the theme of any WordPress website. Developed by wpbeginner, it is free for everyone. All one needs is to land on their web page and follow the steps mentioned below: Go
Read more